clear policy profile
clear policy profile
Use this command to delete a policy profile entry.
Syntax
clear policy profile profile-index
Parameters
profile‐index
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete policy profile 8:
Matrix(rw)->clear policy profile 8
show policy invalid
Displays information about the action the device will apply on an invalid or unknown policy.
Syntax
show policy invalid {action | count | all}
Parameters
action | count | all
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display invalid policy action and count information:
Matrix(rw)->show policy invalid all
Current action on invalid/unknown profile is: Forward packets
Number of invalid/unknown profiles detected: 4
Specifies the index number of the policy profile entry to be deleted.
Valid values are 1 to 1023.
Shows the action the device should take if asked to apply an invalid or
unknown policy, or the number of times the device has detected an
invalid/unknown policy, or both action and count information.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-5
Configuring Policy Profiles