Performing A Partial Keyword Lookup; Displaying Scrolling Screens; Scrolling Screen Output - Enterasys Matrix DFE-Gold Series Configuration Manual

Startup and General Configuration Summary
remote
volatile
nonvolatile
read-only
<cr>
Matrix(rw)->show snmp user
Entering a question mark (?) without a space after a partial keyword will display a list of
commands that begin with the partial keyword. Figure
commands beginning with co:
Figure 2-3
Matrix(rw)->co?
configure
copy
Matrix(rw)->co

Displaying Scrolling Screens

If the CLI screen length has been set using the set length command as described in "set length" on
page 2‐52, CLI output requiring more than one screen will display ‐‐More‐‐ to indicate continuing
screens. To display additional screen output:
• Press any key other than ENTER to advance the output one screen at a time.
• Press ENTER to advance the output one line at a time.
The example in Figure
more than one screen.
Figure 2-4
Matrix(rw)->show mac
MAC Address
----------------------------------------------------------
00-00-1d-67-68-69
00-00-02-00-00-00
00-00-02-00-00-01
00-00-02-00-00-02
00-00-02-00-00-03
00-00-02-00-00-04
00-00-02-00-00-05
00-00-02-00-00-06
00-00-02-00-00-07
00-00-02-00-00-08
--More--
2-10 Startup and General Configuration
Show users with remote SNMP engine ID
Show temporary entries
Show permanent entries
Show r/o entries

Performing a Partial Keyword Lookup

Execute a configuration file
Upload or download an image or configuration file
Note: At the end of the lookup display, the system will repeat the command you entered without the
?.
2‐4 shows how the show mac command indicates that output continues on

Scrolling Screen Output

FID
1
1
1
1
1
1
1
1
1
1
2‐3 shows how to use this function for all
Port Type
host.0.1 learned
fe.1.2 learned
fe.1.3 learned
fe.1.4 learned
fe.1.5 learned
fe.1.6 learned
fe.1.7 learned
fe.1.8 learned
fe.1.9 learned
fe.1.10 learned