Ip Slb Vserver - Enterasys Matrix DFE-Gold Series Configuration Manual

ip slb vserver

Table 19-3 show ip slb vservers Output Details (continued)
Output...
client(s) allowed to use the virtual
server(s)
client(s) allowed direct access to
the real server(s)
ip slb vserver
Use this command to identify an LSNAT virtual server and to access or enable the virtual server
load balance (SLB) configuration mode.
Syntax
ip slb vserver vserver-name
no ip slb vserver vserver-name
Parameters
vserver‐name
Defaults
None.
Mode
Router command, Global configuration mode: Matrix>Router(config)#
Usage
The "no" form of this command deletes the virtual server from the LSNAT configuration.
Example
This example shows how to identify a virtual server named "virtual‐http" and enable
configuration mode for that virtual server. Note that this example also includes the configuration
of the server farm to which this virtual server will be associated.
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#exit
Matrix>Router(config)#ip slb vserver virtual-http
Matrix>Router(config-slb-vserver)#
Configuring Load Sharing Network Address Translation (LSNAT)
What it displays...
Clients with permission to access this server. Set with the client
command as described in "client" on page 19-24.
Clients with permission to access this server without LSNAT
translation. Set with the allow accessservers command as described
in "allow accessservers" on page 19-27.
Specifies a virtual server name.
Enterasys Matrix DFE-Gold Series Configuration Guide 19-21