Show Spantree Spanguardtrapenable; Set Spantree Spanguardtrapenable - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Spanning Tree Bridge Parameters
Example
This example shows how to unlock port fe.1.16:
Matrix(rw)->clear spantree spanguardlock fe.1.16

show spantree spanguardtrapenable

Use this command to displays the state of the Spanning Tree span guard trap function.
Syntax
show spantree spanguardtrapenable
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the state of the span guard trap function:
Matrix(rw)->show spantree spanguardtrapenable
Span Guard Trap is set to enable

set spantree spanguardtrapenable

Use this command to enable or disable the sending of an SNMP trap message when span guard
detects that an unauthorized port has tried to join the Spanning Tree.
Syntax
set spantree spanguardtrapenable {disable | enable}
Parameters
disable | enable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to disable the span guard trap function:
Matrix(rw)->set spantree spanguardtrapenable disable
6-40 Spanning Tree Configuration
Disables or enables the span guard trap function.
show spantree spanguardtrapenable