Clear Cos Port-Config Txq - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Policy Class of Service (CoS)
Parameters
group‐type‐index
name name
ports port‐list
append | clear
Defaults
• If a name is not specified, default names described in Table
• If not specified, this configuration will be applied to all ports in the port group.
• If append or clear are not specified, port(s) will be appended to the specified port grouping.
• If arb‐slice or arb‐percentage values are not specified, default allocations will be applied.
Mode
Switch command, Read‐Write.
Example
This example shows how to create a CoS transmit queue port group entry named "test txq" with a
port group ID of 2 and a port type ID of 1:
Matrix(rw)->set cos port-config txq 2.1 name test txq

clear cos port-config txq

Use this command to clear one or all non‐default Class of Service transmit queue port group
configurations:
Syntax
clear cos port-config txq all | group-type-index {entry | name | ports }
Parameters
all | group‐type‐index
entry
name
ports
Defaults
None.
8-30 Policy Classification Configuration
Specifies a transmit queue port group/type index for this entry. Valid
entries are in the form of group.type. Group can be 0‐7, with 0
designating the default group, and 1‐7 reserved for user‐defined
groups. Default port type values cannot be changed, and are 0 for the
7GR4270‐12, 7G4270‐12, 7G4270‐09, and 7G4270‐10 DFE modules only,
and 1 for all other modules.
(Optional) Specifies a name for this configuration.
(Optional) Applies this configuration to one or more ports in the port
group.
(Optional) Appends or clears port designations from a previously
configured port group.
Clears all transmit queue port config entries or a specific entry.
Clears all non‐default transmit queue entries.
Clears the name associated with this transmit queue entry.
Clears the port(s) assigned to this port group.
clear cos port-config txq
8‐5 will be applied.