Enterasys Matrix DFE-Gold Series Configuration Manual page 45

Table 2-1 Default Device Settings for Basic Switch Operation (continued)
Device Feature
MAC aging time
MAC locking
Management
Authentication Notification
MTU discovery protocol
NetFlow collection
NetFlow export version
NetFlow Version 9
template refresh rate
NetFlow Version 9
template timeout
Passwords
Password aging
Password history
Policy classification
Port auto-negotiation
Port advertised ability
Port broadcast suppression Disabled (no broadcast limit).
Port duplex mode
Port enable/disable
Port priority
Port speed
Port trap
Priority classification
RADIUS client
RADIUS last resort action
RADIUS retries
RADIUS timeout
Rate limiting
SNMP
SNTP
Spanning Tree
Spanning Tree edge port
administrative status
Default Setting
Set to 300 seconds.
Disabled (globally and on all ports).
Enabled
Enabled.
Disabled
Version 5
20 packets
30 minutes
Set to an empty string for all default user accounts. User must press ENTER
at the password prompt to access CLI.
Disabled.
No passwords are checked for duplication.
Classification rules are automatically enabled when created.
Enabled on all ports.
Maximum ability advertised on all ports.
Set to half duplex, except for 100BASE-FX and 1000BASE-X, which is set to
full duplex.
Enabled.
Set to 1.
Set to 10 Mbps, except for 1000BASE-X, which is set to 1000 Mbps, and
100BASE-FX, which is set to 100 Mbps.
All ports are enabled to send link traps.
Classification rules are automatically enabled when created.
Disabled.
When the client is enabled, set to Challenge.
When the client is enabled, set to 3.
When the client is enabled, set to 20 seconds.
Disabled (globally and on all ports).
Enabled.
Disabled.
Globally enabled and enabled on all ports.
Enabled.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-3
Startup and General Configuration Summary