Advertise-Interval; Critical-Ip - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring VRRP

advertise-interval

Use this command to set the interval in seconds between VRRP advertisements.
Syntax
advertise-interval vlan vlan-id vrid interval
no advertise-interval vlan vlan-id vrid interval
Parameters
vlan vlan‐id
vrid
interval
Defaults
None.
Mode
Router command, Router configuration: Matrix>Router(config‐router)#
Usage
All routers with the same VRID should be configured with the same advertisement interval.
VRRP advertisements are sent by the master router to other routers participating in the VRRP
master selection process, informing them of its configured values. Once the master is selected,
then advertisements are sent every advertising interval to let other VRRP routers in this VLAN/
VRID know the router is still acting as master of the VLAN/VRID.
The "no" form of this command clears the VRRP advertise interval value.
Example
This example shows how set an advertise interval of 3 seconds on VLAN 1, VRID 1:
Matrix>Router(config)#router vrrp
Matrix>Router(config-router)#advertise-interval vlan 1 1 3

critical-ip

Use this command to set a critical IP address for VRRP routing.
Syntax
critical-ip vlan vlan-id vrid ip-address [critical-priority]
no critical-ip vlan vlan-id vrid ip-address
21-66 Routing Protocol Configuration
Specifies the number of the VLAN on which to configure the VRRP
advertisement interval. This VLAN must be configured for IP routing
as described in "Reviewing and Configuring Routing" on page 2‐101.
Specifies a unique Virtual Router ID (VRID) associated with the routing
interface. Valid values are from 1 to 255.
Specifies a VRRP advertisement interval to associate with the
values are from 1 to 255 seconds.
advertise-interval
vrid
. Valid