Set Radius-Snooping Initialize; Clear Radius-Snooping All - Enterasys Matrix DFE-Gold Series Configuration Manual

Understanding RADIUS Snooper

set radius-snooping initialize

Use this command to terminate all RS sessions on the system for the specified port or MAC
address.
Syntax
set radius-snooping initialize {port port-string | mac-address}
Parameters
port port‐string
mac‐address
Defaults
None.
Mode
Read‐write.
Example
This example terminates all RS sessions associated with port ge.1.1 by initializing the port:
Matrix(rw)->set radius-snooping initialize port ge.1.1

clear radius-snooping all

Use this command to reset all RS configuration to the default values for this system.
Syntax
clear radius-snooping all
Parameters
None.
Defaults
None.
Mode
Read‐Write.
Example
This example resets all RS configuration to the default setting for this system:
Matrix(rw)->clear radius-snooping all
26-6 RADIUS Snooping Configuration
Specifies the port(s) to initialize. Use *.*.* for all ports.
Specifies the MAC address to initialize.
set radius-snooping initialize