Clear Authentication Login - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting the Authentication Login Method
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the authentication login method to use the local password settings:
Matrix(rw)->set authentication login local

clear authentication login

Use this command to reset the authentication login method to the default setting of "any".
Syntax
clear authentication login
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the authentication login method:
Matrix(rw)->clear authentication login
25-52 Authentication Configuration
clear authentication login