Exclude - Enterasys Matrix DFE-Gold Series Configuration Manual

exclude

Defaults
None.
Mode
Router command, Global configuration: Matrix>Router(config)#
Usage
The "no" form of this command removes the local address pool.
Example
This example shows how to configure a local address pool called "localpool" on IP subnet
172.20.28.0/24. Mask can also be expressed as 255.255.255.0:
Matrix>Router(config)#ip local pool localpool 172.20.28.0/24
Matrix>Router(ip-local-pool)#
exclude
Use this command to exclude one or more addresses from a DHCP local address pool.
Syntax
exclude ip-address number
no exclude ip-address number
Parameters
ip‐address
number
Defaults
None.
Mode
Router command, IP Local Pool configuration: Matrix>Router(ip‐local‐pool)#
Usage
The "no" form of this command removes the addresses from the list of addresses excluded from
the local pool.
Example
This example shows how to exclude 2 IP addresses beginning with 172.20.28.254 from the
"localpool" address pool:
Matrix>Router(config)#ip local pool localpool
Matrix>Router(ip-local-pool)#exclude 172.20.28.254 2
Specifies the starting IP address to be excluded from this pool.
Specifies the number of addresses to be excluded. Valid values are 1 ‐
65535.
Enterasys Matrix DFE-Gold Series Configuration Guide 20-7
DHCP Overview