Show Cep Connections; Show Cep Detection - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Convergence End Points (CEP) Phone Detection
For information about...
set cep detection-id type
set cep detection-id address
set cep detection-id protocol
set cep detection-id porthigh | portlow
set cep initialize
clear cep

show cep connections

Use this command to display all learned CEPs.
Syntax
show cep connections port-string
Parameters
port‐string
Defaults
None
Mode
Read‐Only.
Example
This example shows how to display CEP connections for port fe.1.21:
Matrix>show cep connections fe.1.21
Connection Info for fe.1.21
Endpoint Type
Policy Index
Discovery Time
Firmware Version
Address Type
Endpoint IP
Endpoint MAC

show cep detection

Use this command to display CEP phone detection parameters.
Syntax
show cep detection [detection-id]
25-40 Authentication Configuration
Displays CEP status for one or more ports. For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 4‐2.
h323
3
MON FEB 06 02:31:42 2006
unknown
unavailable
00:04:0d:01:f8:35
show cep connections
Refer to page...
25-45
25-46
25-46
25-47
25-48
25-49