Clear Ip Slb; Show Router Limits (Lsnat) - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)

clear ip slb

Use this command to clear server load balancing counters or to remove server load balancing
connections.
Syntax
clear ip slb {[counters] [connections {all | flowid flowid | serverfarm serverfarm
| vserver vserver}]}
Parameters
counters
connections all |
flowid flowid |
serverfarm serverfarm
| vserver vserver
Defaults
If no parameters are specified, all server load balancing counters are cleared and server load
balancing connections are removed.
Mode
Router command, Privileged EXEC: Matrix>Router#
Example
This example shows how to remove all server load balancing connections:
Matrix>Router#clear ip slb connections all

show router limits (LSNAT)

Use this command to display LSNAT router limits.
Syntax
show router limits [lsnat-bindings] | [lsnat-cache] | [lsnat-configs]
Parameters
lsnat‐bindings
lsnat‐cache
lsnat‐configs
Defaults
If no options are specified, all router limits will be displayed.
Mode
Switch command, Read‐Only.
19-32 LSNAT Configuration
Clears all server load balancing counters.
Removes all server load balancing connections, or those associated with
a specific flow‐ID, server farm name, or virtual server name.
(Optional) Displays the LSNAT maximum bindings limit.
(Optional) Displays the LSNAT cache size limit.
(Optional) Displays the LSNAT configuration limit.
clear ip slb