Set Netflow Export-Destination; Clear Netflow Export-Destination - Enterasys Matrix DFE-Gold Series Configuration Manual

set netflow export-destination

Defaults
None.
Mode
Switch command, Read‐Write.
Usage
When this command is executed, NetFlow is effectively disabled on the system.
Example
This example shows how to remove the NetFlow caches on the DFE blades and disable NetFlow:
Matrix(rw)->clear netflow cache
set netflow export-destination
Use this command to configure the NetFlow collector destination.
Syntax
set netflow export-destination ip-address [udp-port]
Parameters
ip‐address
udp‐port
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
By default, no collector address is configured. Only one collector destination per Enterasys Matrix
system can be configured.
Example
This example shows how to set the IP address of the NetFlow collector:
Matrix(rw)->set netflow export-destination 10.10.1.1

clear netflow export-destination

Use this command to clear the NetFlow collector IP address.
Syntax
clear netflow export-destination [ip-address [udp-port]]
Specifies the IP address of the NetFlow collector.
(Optional) Specifies the UDP port number used by the NetFlow
collector. Default is 2055.
Enterasys Matrix DFE-Gold Series Configuration Guide 15-5
Configuring NetFlow