Default-Router - Enterasys Matrix DFE-Gold Series Configuration Manual

DHCP Overview
Parameters
type
Defaults
None.
Mode
Router command, Any DHCP configuration mode.
Usage
This command configures DHCP option 46.
The "no" form of this command deletes the NetBIOS node type.
Example
This example shows how to specify hybrid as the NetBIOS node type for the "localpool" address
pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#netbios-node type h-node

default-router

Use this command to assign a default router list to DHCP clients.
Syntax
default-router address [address2...address8]
no default-router
Parameters
address
address2...
address8
Defaults
If address2...address8 is not specified, no additional addresses will be configured.
Mode
Router command, Any DHCP configuration mode.
20-12 DHCP Configuration
Specifies the NetBIOS node type. Valid values and their corresponding
types are:
• h‐node — hybrid (recommended)
• b‐node — broadcast
• p‐node — peer‐to‐peer
• m‐mode — mixed
Specifies the IP address of a default router.
(Optional) Specifies, in order of preference, up to 7 additional default
router IP address(es).
default-router