Ip Rip Authentication Mode; No Auto-Summary - Enterasys Matrix DFE-Gold Series Configuration Manual

ip rip authentication mode

ip rip authentication mode
Use this command to set the authentication mode when a key chain is present.
Syntax
ip rip authentication mode {text | md5}
no ip rip authentication mode
Parameters
text
md5
Defaults
None.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
The RIP authentication keychain must be enabled as described in "ip rip authentication keychain"
on page 21‐12 before RIP authentication mode can be configured.
The "no" form of this command suppresses the use of authentication.
Example
This example shows how to set the authentication mode for VLAN 1 as "text":
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip rip authentication mode text

no auto-summary

Use this command to disable automatic route summarization.
Syntax
no auto-summary
auto-summary
Parameters
None.
Defaults
None.
Mode
Router command, Router configuration: Matrix>Router(config‐router)#
Initiates text‐only authentication.
Initiates MD5 authentication.
Enterasys Matrix DFE-Gold Series Configuration Guide 21-13
Configuring RIP