Clear Physical Alias; Show Physical Assetid - Enterasys Matrix DFE-Gold Series Configuration Manual

clear physical alias

Mode
Switch command, Read‐Write.
Example
This example shows how to set the alias for the chassis to "chassisone":
Matrix(rw)->set physical alias chassis chassisone
clear physical alias
Use this command to reset the alias for a physical object to a zero‐length string.
Syntax
clear physical alias {[chassis] [slot slot] [backplane backplane] [module module]
[powersupply powersupply] [powersupply-slot powersupply-slot] [fan] [fan-slot]
[port-string port-string]}
Parameters
chassis
slot slot
backplane backplane
module module
powersupply
powersupply
fan
port‐string port‐string Clears an alias for a specific port.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set clear the alias set for the chassis:
Matrix(rw)->clear physical alias chassis

show physical assetid

Use this command to display the asset ID for a module.
Syntax
show physical assetid module module
Clears the chassis alias.
Clears and alias for a specific slot.
Clears and alias for a specific backplane. Valid values are 1 for FTM 1
and 2 for FTM 2.
Clears an alias for a specific module.
Clears an alias for a specific power supply. Valid values are 1 or 2.
Clears the fan tray alias
Enterasys Matrix DFE-Gold Series Configuration Guide 2-55
Setting Basic Device Properties