Clear Banner; Show Version - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Basic Device Properties

clear banner

Use this command to clear the banner message displayed at pre and post session login to a blank
string.
Syntax
clear banner {login | motd}
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the post session message of the day banner to a blank string:
Matrix(rw)->clear banner motd

show version

Use this command to display hardware and firmware information. Refer to "Downloading a New
Firmware Image" on page 2‐72 for instructions on how to download a firmware image.
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display version information:
Matrix(rw)->show version
Copyright (c) 2004 by Enterasys Networks, Inc.
Slot
------
1
2-48 Startup and General Configuration
Model Serial #
---------------- --------------------
7G4270-12 CH-2R72
Versions
-------------
Hw: 2
clear banner