Dir Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Managing Configuration and Image Files
slot6:
Filename:
Version:
Size:
Date:
CheckSum:
Location:
Compatibility: 7G4202-30, 7G4202-60, 7G4270-09, 7G4270-10,
12, 7G4282-41, 7H4202-72, 7H4203-72,
49, 7H4383-49,
Files:
=====================================================
slot1:
FEB 24 2004 15:25:24
Table 2‐7 provides an explanation of the command output.
Table 2-7 dir Output Details
Output...
Images
Filename
Version
Size
Date
CheckSum
Location
Compatibility
Files
SlotN
2-82 Startup and General Configuration
04.21.03 (Active) (Boot)
04.21.03
5494579 (bytes)
FRI JUL 30 08:50:40 2004
f564c266c3a5907a9f3750dd17db6999
slot1
7H4385-49, 7K4290-02, 2G4072-52
7060 sample.cfg
What it displays...
Lists all the images resident in the chassis and information about each.
Name of the image file stored in the local file system. Various flags
may be listed after the filename, including:
• (active) - Indicates this image is currently running.
• (boot) - Indicates this image is selected to boot on the next reset.
Firmware version of the image.
Size of image file in the local file system.
Date of image file in the local file system.
MD5 checksum calculated across the entire image file, used for image
identity and verification.
Modules on which this image resides. The system automatically
mirrors all images to all other compatible modules in the system. A
user cannot selectively add or remove images from individual modules
while they reside in the same chassis.
Module types on which this image is qualified to run. Attempting to run
an incompatible image on a given module will not succeed.
User maintained files, such as CLI configuration files. For details on
working with configuration files, refer to show config
page 2-85) and configure ("configure" on page 2-86.)
Lists user maintained files by slot location.
7H4284-49, 7H4382-25, 7H4382-
("show
dir
7G4270-
config" on