Table of Contents
Advertisement
Configuring PIM
Example
This example shows a portion of the IP multicast forwarding table display:
Matrix>Router#show ip mforward
IP Multicast Forwarding Table
1 of 8: (63.63.100.1/32, 225.1.2.3)
Sources: 63.63.100.1
Incoming interface: Vlan-999
Outgoing interface list:
Vlan-410, Forward/Sparse
Vlan-555, Forward/Sparse
Vlan-910, Forward/Sparse
Vlan-920, Forward/Sparse
show ip rpf
Use this command to display the reverse path of an address in the unicast table.
Syntax
show ip rfp
Parameters
None.
Defaults
None.
Mode
Router command, Any router mode.
Example
This example shows the reverse path information for IP address 80.80.80.252.
Matrix(rw)->Router2>show ip rpf 80.80.80.252
RPF information for: 80.80.80.252
RPF vlan interface: 10
RPF route/mask:192.168.1.0/255.255.255.0
RPF neighbor:192.168.1.25
Metric preference:110
Metric:10
17-12 PIM Configuration
show ip rpf
- Quick Links:
- Set Ip Address
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?