Managing The Management Authentication Notification Mib; Purpose; Commands; Show Mgmt-Auth-Notify - Enterasys Matrix DFE-Gold Series Configuration Manual

Managing the Management Authentication Notification MIB

Managing the Management Authentication Notification MIB

Purpose

This MIB provides controls for enabling/disabling the sending of SNMP notifications when a user
login authentication event occurs for various management access types. The types of access
currently supported by the MIB include console, telnet, ssh, and web.

Commands

The CLI commands used to set the Management Authentication Notification are listed below and
described in the associated section as shown.
For information about...

show mgmt-auth-notify

set mgmt-auth-notify
clear mgmt-auth-notify
show mgmt-auth-notify
Use this command to display the current setting for the Management Authentication Notification
MIB.
Syntax
show mgmt-auth-notify
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the current information for the Management Authentication
Notification.:
Matrix(su)->show mgmt-auth-notify
Management Type
---------------
console
2-26 Startup and General Configuration
Note: Ensure that SNMP is correctly configured on the DFE in order to send these notifications.
Refer to Chapter 5 for SNMP configuration information.
Status
--------
enabled
show mgmt-auth-notify
Refer to page...
2-26
2-27
2-28