2.2.9.3
show config
Use this command to display the system configuration or write the configuration to a file.
show config [all] [facility] [outfile outfile]
Syntax Description
all
facility
outfile outfile
Command Type
Switch.
Command Mode
Read-Write.
Command Defaults
If no parameters are specified, only non-default system configuration settings will
be displayed.
(Optional) Displays default and non-default configuration
settings.
(Optional) Displays the configuration for a specific facility.
(Optional) Specifies a file in which to store the
configuration.
Matrix DFE-Platinum and Diamond Series Configuration Guide
General Configuration Command Set
Managing Configuration and Image Files
2-135