Show Console Bits; Set Console Bits - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Console Port Properties
Parameters
port‐string
Defaults
If port‐string is not specified, flow control will be cleared for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear flow control for console port com.1.1:
Matrix(rw)->clear console flowcontrol com.1.1

show console bits

Use this command to display the number of bits per character set for one or more console ports.
Syntax
show console bits [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, the bits per character setting for all console ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the bits per character setting for console port com.1.1:
Matrix(rw)->show console bits com.1.1
Port
------------
com.1.1

set console bits

Use this command to set the number of bits per character for one or more console ports.
Syntax
set console bits num-bits [port-string]
4-8 Port Configuration
(Optional) Clears flow control for specific console port(s).
(Optional) Displays the bits per character setting for specific console
port(s).
Bits
--------
8
show console bits