Show Snmp Notify Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring SNMP Notification Parameters
Parameters
notify
volatile | nonvolatile
| read‐only
Defaults
• If a notify name is not specified, all entries will be displayed.
• If volatile, nonvolatile or read‐only are not specified, all storage type entries will be
displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the SNMP notify information:
Matrix(rw)->show snmp notify
--- SNMP notifyTable information ---
Notify name
Notify Tag
Notify Type
Storage type
Row status
Notify name
Notify Tag
Notify Type
Storage type
Row status
Table 5‐11 shows a detailed explanation of the command output.
Table 5-11 show snmp notify Output Details
Output...
Notify name
Notify Tag
Notify Type
Storage type
Row status
5-34 SNMP Configuration
(Optional) Displays notify entries for a specific notify name.
(Optional) Displays notify entries for a specific storage type.
= 1
= Console
= trap
= nonVolatile
= active
= 2
= TrapSink
= trap
= nonVolatile
= active
What it displays...
A unique identifier used to index the SNMP notify table.
Name of the entry in the SNMP notify table.
Type of notification: SNMPv1 or v2 trap or SNMPv3 InformRequest
message.
Whether access entry is stored in volatile, nonvolatile or read-only
memory.
Status of this entry: active, notInService, or notReady.
show snmp notify