Clear Port Advertise - Enterasys Matrix DFE-Gold Series Configuration Manual

clear port advertise

Parameters
port-string
10t
10tfd
100tx
100txfd
1000x
1000xfd
1000t
1000tfd
pause
apause
spause
bpause
Defaults
At least one optional parameter must be specified.
Mode
Switch command, Read‐Write.
Example
This example shows how to set fe.3.4 to advertise 100BASE‐TX full duplex operation:
Matrix(rw)->set port advertise fe.3.4 100txfd
clear port advertise
Use this command to reset advertised ability to the default setting on one or more ports.
Syntax
clear port advertise port-string [10t | 10tfd | 100tx | 100txfd | 1000x | 1000txfd
| 1000t | 1000tfd | pause | apause | spause | bpause]
Parameters
port-string
10t
10tfd
Specifies the port(s) for which to set advertised ability. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
(Optional) Advertises 10BASE‐T half duplex mode.
(Optional) Advertises 10BASE‐T full duplex mode.
(Optional) Advertises 100BASE‐TX half duplex mode.
(Optional) Advertises 100BASE‐TX full duplex mode.
(Optional) Advertises 1000BASE‐X, ‐LX, ‐SX, ‐CX half duplex mode.
(Optional) Advertises 1000BASE‐X, ‐LX, ‐SX, ‐CX full duplex mode.
(Optional) Advertises 1000BASE‐T half duplex mode.
(Optional) Advertises 1000BASE‐T full duplex mode.
(Optional) Advertises PAUSE for full‐duplex links.
(Optional) Advertises asymmetric PAUSE for full‐duplex links.
(Optional) Advertises symmetric PAUSE for full‐duplex links.
(Optional) Advertises asymmetric and symmetric PAUSE for full‐
duplex links
Specifies port(s) for which advertised ability will be reset. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
(Optional) Clears 10BASE‐T half duplex mode from the port's
advertised ability.
(Optional) Clears 10BASE‐T full duplex mode from the port's
advertised ability.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-35
Setting Auto-Negotiation and Advertised Ability