Clear Sntp Poll-Interval; Set Sntp Poll-Retry; Clear Sntp Poll-Retry - Enterasys Matrix DFE-Gold Series Configuration Manual

clear sntp poll-interval

clear sntp poll-interval
Use this command to clear the poll interval between unicast SNTP requests.
Syntax
clear sntp poll-interval
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the SNTP poll interval:
Matrix(rw)->clear sntp poll-interval

set sntp poll-retry

Use this command to set the number of poll retries to a unicast SNTP server.
Syntax
set sntp poll-retry retry
Parameters
retry
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the number of SNTP poll retries to 5:
Matrix(rw)->set sntp poll-retry 5

clear sntp poll-retry

Use this command to clear the number of poll retries to a unicast SNTP server.
Syntax
clear sntp poll-retry
Specifies the number of retries. Valid values are 0 to 10.
Enterasys Matrix DFE-Gold Series Configuration Guide 13-7
Configuring Simple Network Time Protocol (SNTP)