Show Pwa - Enterasys Matrix DFE-Gold Series Configuration Manual

show pwa

For information about...
set pwa maxrequests
set pwa portcontrol
show pwa session
show pwa
Use this command to display port web authentication information for one or more ports.
Syntax
show pwa [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, PWA information will be displayed for all ports.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display PWA information for ge.2.1:
Matrix(rw)->show pwa ge.2.1
PWA Status
PWA IP Address
PWA Protocol
PWA Enhanced Mode
PWA Logo
PWA Guest Networking Status - disabled
PWA Guest Name
PWA Redirect Time
Port
-------- ----------------
ge.2.1
Table 25‐1 provides an explanation of the command output.
(Optional) Displays PWA information for specific port(s).
- enabled
- 192.168.62.99
- PAP
- N/A
- enabled
- guest
- N/A
Mode AuthStatus
--------------
foreauthorized disconnected
Configuring Port Web Authentication (PWA)
QuietPeriod MaxReq
----------- ---------
60 16
Enterasys Matrix DFE-Gold Series Configuration Guide 25-13
Refer to page...
25-24
25-24
25-25