Show Sntp; Show Sntp Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Simple Network Time Protocol (SNTP)

show sntp

Use this command to display SNTP client settings.
Syntax
show sntp
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display SNTP client settings:
Matrix(rw)->show sntp
SNTP Version: 3
Current Time: TUE SEP 09 16:13:33 2003
Timezone: 'EST', offset from UTC is -4 hours and 0 minutes
Client Mode: unicast
Broadcast Delay: 3000 microseconds
Broadcast Count: 0
Poll Interval: 512 seconds
Poll Retry: 1
Poll Timeout: 5 seconds
SNTP Poll Requests: 1175
Last SNTP Update: TUE SEP 09 16:05:24 2003
Last SNTP Request: TUE SEP 09 16:05:24 2003
Last SNTP Status: Success
SNTP-Server
-------------------------------------------
10.2.8.6
144.111.29.19
Table 13‐1 provides an explanation of the command output.
Table 13-1 show sntp Output Details
Output...
SNTP Version
Current Time
Timezone
13-2 SNTP Configuration
Precedence Status
2 Active
1 Active
What it displays...
SNTP version number.
Current time on the system clock.
Time zone name and amount it is offset from UTC (Universal Time).
Set using set timezone command ("set timezone" on page 13-9).
show sntp