Show Ip Pim Interface; Show Ip Pim Bsr Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring PIM
Mode
Router command, Privileged EXEC: Matrix>Router#
Example
This example shows how to display BootStrap Router (BSR) information:
Matrix>Router#show ip pim bsr
PIMv2 Elected Bootstrap Router Information:
BSR Address: 10.0.0.1
Bsr Priority: 77
Bsr Hash Mask Length: 30
Bsr Uptime: 00:01:10
Bsr Expiry: 00:00:49
This Router is a Candidate Bootstrap Router (CBSR)
Candidate BSR Address: 10.0.0.1
Hash Mask Length: 30
Priority: 77
Table 17‐1 provides an explanation of the command output.
Table 17-1 show ip pim bsr Output Details
Output...
BSR Address
BSR Priority
BSR Hash Mask Length
BSR Uptime
BSR Expiry

show ip pim interface

Use this command to display information about PIM interfaces that are currently up (not
shutdown).
Syntax
show ip pim interface [interface]
17-6 PIM Configuration
What it displays...
IP address of the bootstrap router.
Priority as set by the ip pim bsr-candidate command.
Length of a mask (32 bits maximum) that is to be added with the group
address before the hash function is called. This value is configured by
the ip pim bsr-candidate command.
Interval that this router has been up (in hours:minutes:seconds). After
24 hours, format will change into days:hours and, after a week, will
change into weeks:days.
Period in which the next bootstrap message is due from this BSR (in
hours:minutes:seconds). After 24 hours, format will change into
days:hours and, after a week, will change into weeks:days. Assigning
a time value of 00:00:00 means this BSR will not expire.
show ip pim interface