Show System Utilization - Enterasys Matrix DFE-Gold Series Configuration Manual

show system utilization

show system utilization
Use this command to display system resource utilization information.
Syntax
show system utilization [cpu | process | storage] [slot slot]
Parameters
cpu | process |
storage
slot slot
Defaults
• If not specified, CPU, process, and storage system utilization information will be displayed.
• If not specified, information for all modules will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display all system utilization information for the module in slot 1:
Matrix(rw)->show system utilization slot 1
CPU Utilization Threshold Traps enabled: Threshold = 80.0%
Total CPU Utilization:
Slot
---------------------------------------------------
1
Process Utilization:
Slot: 1 CPU: 1
Lookup DDR:
Transmit DDR:
Receive DDR:
Routing DDR:
MAC CHIP
Model:
Revision:
PHY CHIP 0
Model:
Revision:
(Optional) Displays total CPU, individual process, or storage resource
utilization only.
(Optional) Displays system resource utilization for a specific module.
CPU
1
8 MB 8 MB
8 MB 8 MB
8 MB 8 MB
8 MB 8 MB
0 1
FastEnet FastEnet
1 1
BCM5226
2
5 sec 1 min 5 min
3.6% 3.0% 3.0%
Enterasys Matrix DFE-Gold Series Configuration Guide 2-37
Setting Basic Device Properties
8 MB
8 MB
8 MB
8 MB
2
FTM1
0