Show Snmp Group - Enterasys Matrix DFE-Gold Series Configuration Manual

show snmp group

Defaults
If remote is not specified, the user will be removed from the local SNMP engine.
Mode
Switch command, Read‐Write.
Example
This example shows how to remove the SNMP user named "bill":
Matrix(rw)->clear snmp user bill
show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
Syntax
show snmp group [groupname groupname] [user user] [security-model {v1 | v2c | usm}]
[volatile | nonvolatile | read-only]
Parameters
groupname groupname (Optional) Displays information for a specific SNMP group.
user user
security‐model v1 |
v2c | usm
volatile | nonvolatile
| read‐only
Defaults
• If groupname is not specified, information about all SNMP groups will be displayed.
• If user is not specified, information about all SNMP users will be displayed.
• If security‐model is not specified, user information about all SNMP versions will be
displayed.
• If not specified, information for all storage types will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display SNMP group information:
Matrix(rw)->show snmp group
--- SNMP group information ---
Security model
Security/user name
Group name
(Optional) Displays information about users within the specified group.
(Optional) Displays information about groups assigned to a specific
security SNMP model.
(Optional) Displays SNMP group information for a specified storage
type.
= SNMPv1
= public
= Anyone
Enterasys Matrix DFE-Gold Series Configuration Guide 5-13
Configuring SNMP Users, Groups and Communities