Show Port Status; Show Port Status Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Reviewing Port Status

show port status

Use this command to display operating and admin status, speed, duplex mode and port type for
one or more ports on the device.
Syntax
show port status [port-string] [-interesting]
Parameters
port‐string
‐interesting
Defaults
If no options are specified, status information for all ports will be displayed.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display status information for port ge.3.1 through 4:
Matrix(rw)->show port status ge.3.1-4
Port
------------
ge.3.14
This example shows how to display status information for console ports:
Matrix(rw)->show port status com.*.*
Port
------------
com.5.1
com.7.1
Table 4‐1 provides an explanation of the command output.
Table 4-1 show port status Output Details
Output...
Port
Alias (truncated)
4-14 Port Configuration
(Optional) Displays status for specific port(s). For a detailed description
of possible port‐string values, refer to "Port String Syntax Used in the
CLI" on page 4‐2.
(Optional) Displays only ports with an operational status of up or
dormant.
Alias Oper
(truncated) Status
-------------- -------
up
Alias Oper
(truncated) Status
-------------- -------
up
up
What it displays...
Port designation. For a detailed description of possible port-string
values, refer to
Alias configured for the port. For details on using the set port alias
command, refer to
Admin Speed
Status
------- --------
up 1 Gbps
Admin Speed
Status
------- --------
up 38 Kbps
up 38 Kbps
"Port String Syntax Used in the
"show port alias" on page 4-21.
show port status
Duplex Type
------- -------------
full 1000-SX MT-RJ
Duplex Type
------- -------------
RS232 RJ45
RS232 RJ45
CLI" on page 4-2.