Ip Dhcp Pool; Domain-Name - Enterasys Matrix DFE-Gold Series Configuration Manual

ip dhcp pool

Usage
The "no" form of this command resets the ping timeout to the default value.
Example
This example shows how to set the DHCP ping timeout to 900 milliseconds:
Matrix>Router(config)#ip dhcp ping timeout 900
ip dhcp pool
Use this command to assign a name to a DHCP server pool of addresses, and to enable DHCP
address pool configuration mode.
Syntax
ip dhcp pool name
no ip dhcp pool name
Parameters
name
Defaults
None.
Mode
Router command, Global configuration: Matrix>Router(config)#
Usage
The "no" form of this command deletes a DHCP address pool.
Example
This example shows how to assign the name "localpool" as a DHCP address pool, and enable
configuration mode for that address pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#

domain-name

Use this command to assign a domain name to a DHCP client.
Syntax
domain-name domain
no ip dhcp domain-name domain
Specifies a DHCP address pool name.
Note: This must match the previously configured name assigned with the ip
local pool command as described in
Enterasys Matrix DFE-Gold Series Configuration Guide 20-9
"ip local pool" on page 20-6.
DHCP Overview