ip policy pinger
interval interval
retries retries
Defaults
•
If not specified, interval will be set to 3 seconds.
•
If not specified, retries will be set to 3.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan <vlan_id>))#
Usage
The "no" form of this command turns PBR ping to off.
Example
This example shows how to configure the PBR ping interval to 5 and retries to 4 on VLAN 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip policy pinger on interval 5 retries 4
(Optional) When ping is on, specifies the ping interval in seconds. Valid
values are 1 ‐ 30. Default is 3.
(Optional) When ping is on, specifies the number of retries (timeout
failures) before setting the hop as unavailable. Valid values are 1 ‐ 10.
Default is 3.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-49
Configuring Policy-Based Routing
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?
Questions and answers