Show Nodealias Protocol - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Node Aliases
Example
This example shows how to display node alias entries for BPDU traffic on MAC addresses
beginning with 00‐e0. Refer back to Table
Matrix(rw)->show nodealias mac 00-e0 bpdu
Port: lag.0.1
--------------------------------------------------------
Alias ID
Vlan ID
Protocol
Port: lag.0.1
--------------------------------------------------------
Alias ID
Vlan ID
Protocol
Port: ge.3.14
--------------------------------------------------------
Alias ID
Vlan ID
Protocol
Port: ge.3.17
--------------------------------------------------------
Alias ID
Vlan ID
Protocol

show nodealias protocol

Use this command to display node alias entries based on protocol and protocol address.
Syntax
show nodealias protocol {ip | apl | mac | hsrp | dhcps | dhcpc | bootps | bootpc
| ospf | vrrp | ipx | xrip | xsap | ipx20 | rtmp | netBios | nbt | bgp | rip |
igrp | dec | bpdu | udp} [ip-address ip-address] [port-string]
14-4 Node Alias Configuration
14‐1 for a description of the command output.
Time: 0 days 01 hrs 34 mins 53 secs
= 306783575 Active
= 1 MAC Address
= bpdu
Time: 0 days 01 hrs 34 mins 54 secs
= 306783579 Active
= 1 MAC Address
= bpdu
Time: 0 days 00 hrs 00 mins 46 secs
= 613566759 Active
= 1 MAC Address
= bpdu
Time: 0 days 03 hrs 03 mins 52 secs
= 613566837 Active
= 1 MAC Address
= bpdu
show nodealias protocol
= true
= 00-e0-63-59-f4-3d
= true
= 00-e0-63-59-f4-55
= true
= 00-e0-63-97-4b-69
= true
= 00-e0-63-97-d0-a0