Show Snmp User Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

show snmp user
• If user is not specified, information about all SNMP users will be displayed.
• If remote is not specified, user information about the local SNMP engine will be displayed.
• If not specified, user information for all storage types will be displayed.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display an SNMP user list:
Matrix(rw)->show snmp user list
--- SNMP user information ---
--- List of registered users:
Guest
admin1
admin2
netops
This example shows how to display information for the SNMP "guest" user:
Matrix(rw)->show snmp user guest
--- SNMP user information ---
EngineId:
Username
Auth protocol
Privacy protocol
Storage type
Row status
Table 5‐5 shows a detailed explanation of the command output.
Table 5-5 show snmp user Output Details
Output...
EngineId
Username
Auth protocol
Privacy protocol
Storage type
Row status
00:00:00:63:00:00:00:a1:00:00:00:00
= Guest
= usmNoAuthProtocol
= usmNoPrivProtocol
= nonVolatile
= active
What it displays...
SNMP local engine identifier.
SNMPv1 or v2 community name or SNMPv3 user name.
Type of authentication protocol applied to this user.
Whether a privacy protocol is applied when authentication protocol is
in use.
Whether entry is stored in volatile, nonvolatile, or read-only memory.
Status of this entry: active, notInService, or notReady.
Configuring SNMP Users, Groups and Communities
Enterasys Matrix DFE-Gold Series Configuration Guide 5-11