Set Macauthentication Password; Show Macauthentication Session Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

set macauthentication
Table 25-3 show macauthentication session Output Details
Output...
Port
MAC Address
Duration
Reauth Period
Reauthentications
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
enable | disable
Defaults
Disabled.
Mode
Switch command, Read‐Write.
Examples
This example shows how to globally enable MAC authentication:
Matrix(rw)->set macauthentication enable

set macauthentication password

Use this command to set a MAC authentication password.
Syntax
set macauthentication password password
Parameters
password
What it displays...
Port designation. For a detailed description of possible port-string
values, refer to "Port String Syntax Used in the
MAC address associated with the session.
Time this session has been active.
Reauthentication period for this port, set using the set
macauthentication reauthperiod command described in
macauthentication
Whether or not reauthentication is enabled or disabled on this port. Set
using the set macauthentication reauthentication command
described in "set macauthentication
Globally enables or disables MAC authentication.
Specifies a text string MAC authentication password.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-29
Configuring MAC Authentication
reauthperiod" on page 25-35.
reauthentication" on page 25-34.
CLI" on page 4-2.
"set