Clear Policy Allowed-Type; Clear Policy Port-Hit - Enterasys Matrix DFE-Gold Series Configuration Manual

clear policy allowed-type

Mode
Switch command, Read‐Write.
Examples
This example shows how to allow only rule type 1 (source MAC address classification) to be
applied to the admin profile for port ge.1.5:
Matrix(rw)->set policy allowed-type ge.1.5 traffic-rule 1
This example shows how to clear only rule type 27 (VLAN classification) from the allowed rule
type list on port ge.1.5. Any other allowed rule types on the port will still remain assigned to that
port:
Matrix(rw)->set policy allowed-type ge.1.5 traffic-rule 27 clear
clear policy allowed-type
Use this command to clear the list of traffic rules currently assigned to the admin profile for one or
more ports. This will reassign the default setting, which is all rules are allowed.
Syntax
clear policy allowed-type port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
This command will reassign the default setting, which is all rules are allowed.
Example
This example shows how to clear the allowed rule list from port ge.1.5:
Matrix(rw)->clear policy allowed-type ge.1.5

clear policy port-hit

Use this command to clear rule port hit indications on one or more ports.
Syntax
clear policy port-hit {all | port-list port-list}
Parameters
all | port‐list port‐list
Specifies port(s) on which to clear traffic rules.
Clears port hit indications on all ports or on one or more specified ports.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-19
Assigning Classification Rules to Policy Profiles