Clear Console Bits; Show Console Stopbits - Enterasys Matrix DFE-Gold Series Configuration Manual

clear console bits

Parameters
num‐bits
port‐string
Defaults
If port‐string is not specified, bits per character will be set for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to set bits per character to 5 for console port com.1.1:
Matrix(rw)->set console bits 5 com.1.1
clear console bits
Use this command to clear the number of bits per character for one or more console ports.
Syntax
clear console bits [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, bits per character will be cleared for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear bits per character for console port com.1.1:
Matrix(rw)->clear console bits com.1.1

show console stopbits

Use this command to display the console port stop bits per character.
Syntax
show console stopbits [port-string]
Parameters
port‐string
Specifies the number of bits per character. Valid values are 5, 6, 7, and 8.
(Optional) Sets bits per character for specific console port(s).
(Optional) Clears bits per character for specific console port(s).
(Optional) Displays stop bits for specific console port(s).
Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-9