Show Radius-Snooping Session; Radius-Snooping Flow Settings - Enterasys Matrix DFE-Gold Series Configuration Manual

Understanding RADIUS Snooper
Total RADIUS Access Accepts
Total RADIUS Access Rejects
Invalid RADIUS Request packets : 0
Invalid RADIUS Response packets: 0
Total Dropped Packets
Table 26-3 Radius-Snooping Flow Settings
Output...
FlowID
Client IP
Server IP
UDP Port
Validation
Number of current sessions
Number pending
Total Sessions
Total RADIUS Access Requests
Total RADIUS Access Rejects
Invalid RADIUS Request Packets
Invalid RADIUS Response Packets
Total Dropped Packets

show radius-snooping session

Use this command to display an RS summary for all sessions or the specified port or MAC address
criteria.
Syntax
show radius-snooping session {port port-string | mac mac-address}
Parameters
port port‐string
mac mac‐address
26-10 RADIUS Snooping Configuration
: 212
: 26
: 0
What it displays...
Specifies the index ID for this flow.
Specifies the client IP address for this flow.
Specifies the server IP address for this flow.
Specifies the authentication server UDP port for this flow.
Specifies enabled if there is a secret configured, otherwise
specifies disabled. For security reasons the secret does not
display.
Specifies the number of active sessions for this flow.
Specifies the number of valid RADIUS request frames pending,
but no matching RADIUS response frame has been seen. These
sessions are currently inactive.
Specifies the total number of sessions on this system.
Specifies the total number of RADIUS access requests seen by
RS on this system.
Specifies the total number of RADIUS response reject frames
seen by RS on this system.
Specifies the total number of RADIUS request frames seen by the
RS on this system.
Specifies the total number of Invalid RADIUS response frames
seen by RS on this system. An invalid frame is generated when
request frames do not contain the necessary attributes with the
required values for successful processing.
Specifies the total number of frames dropped by RS on this
system.
Specifies the port(s) session to display. Enter *.*.* for all ports.
Specifies the MAC address session to display
show radius-snooping session