Show Gvrp; Show Garp Timer; Show Gvrp Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Enabling/Disabling GVRP

show gvrp

Use this command to display GVRP configuration information.
Syntax
show gvrp [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, GVRP configuration information will be displayed for all ports and
the device.
Mode
Switch command, Read‐Only.
Example
This example shows how to display GVRP status for the device and for Fast Ethernet port 1 in
module 2:
Matrix(rw)->show gvrp fe.2.1
Global GVRP status is enabled.
Port Number
-----------
fe.2.1
Table 7‐4 provides an explanation of the command output.
Table 7-4 show gvrp Output Details
Output...
Port Number
GVRP status
Last PDU Origin

show garp timer

Use this command to display GARP timer values for one or more ports.
Syntax
show garp timer [port-string]
7-24 802.1Q VLAN Configuration
(Optional) Displays GVRP configuration information for specific
port(s). For a detailed description of possible port‐string values, refer to
"Port String Syntax Used in the CLI" on page 4‐2.
GVRP status Last PDU Origin
----------- -----------------
enabled 00-e0-63-97-d4-36
What it displays...
Port designation. For a detailed description of possible port-string
values, refer to
Whether GVRP is enabled or disabled on the port.
MAC address of the last GVRP frame received on the port.
"Port String Syntax Used in the
show gvrp
CLI" on page 4-2.