Show Flowlimit; Set Flowlimit - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Flow Setup Throttling (FST)

show flowlimit

Use this command to display flow setup throttling information.
Syntax
show flowlimit [port [port-string]] [stats [port-string]]
Parameters
port port‐string
stats port‐string
Defaults
If no optional parameters are specified, detailed flow limiting information will be displayed for all
ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display flow limiting information for Fast Ethernet port 1 in module
2. In this case, it is enabled for FST with an "unspecified" port classification, is currently
operational, and has no FST action assigned:
Matrix(rw)->show flowlimit limit port fe.2.1
Flow setup throttling port configuration:
Port
--------- ------------------ -------- --------------------- ---------- -----
fe.2.1

set flowlimit

Use this command to globally enable or disable flow setup throttling.
Syntax
set flowlimit {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
24-26 Security Configuration
(Optional) Displays flow limiting port settings for one or all ports.
(Optional) Displays flow limiting statistics for one or all ports.
Class State
unspecified enabled
Globally enables or disables FST.
Status
operational
show flowlimit
Reason Layer
noAction L4