Show Multiauth Session - Enterasys Matrix DFE-Gold Series Configuration Manual

show multiauth session

Mode
Switch command, Read‐Write.
Example
This example shows how to clear the multiple authentication station entry associated with port
fe.1.20:
Matrix(rw)->clear multiauth station port fe.1.20
show multiauth session
Use this command to display multiple authentication session entries.
Syntax
show multiauth session [all] [agent {dot1x | mac | pwa | cep}] [mac address] [port
port-string]
Parameters
all
agent | dot1x | mac |
pwa | cep
mac address
port port‐string
Defaults
If no options are specified, multiple authentication session entries will be displayed for all
sessions, authentication types, MAC addresses, and ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display multiple authentication session:
Matrix(rw)->show multiauth session
Multiple authentication session entries
-----------------------------------------
Port
Auth status
Agent type
Server type
Policy index
Session timeout : 43200
Idle timeout
(Optional) Displays information about all sessions, including those
with terminated status.
(Optional) Displays 802.1X, MAC, CEP, or port web authentication
session information.
(Optional) Displays multiple authentication session entries for specific
MAC address(es).
(Optional) Displays multiple authentication session entries for specific
port(s).
: fe.2.2 Station address
: success Last attempt
: pwa Session applied
: radius VLAN-Tunnel-Attr
: 0 Policy name
Session duration
: 300 Idle time
Configuring Multiple Authentication
: 00-01-f4-2b-4f-8b
: MON MAY 08 14:34:42 2006
: true
: None
: No policy applied
: 0,00:01:01
: 0,00:00:00
Enterasys Matrix DFE-Gold Series Configuration Guide 27-9