Show Maclock Stations; Show Maclock Stations Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring MAC Locking

show maclock stations

Use this command to display MAC locking information about end stations connected to the
device.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
firstarrival
static
port_string
Defaults
If no parameters are specified, MAC locking information will be displayed for end stations in the
stations table. This does not include static configured end stations.
Mode
Switch command, Read‐Only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Fast Ethernet ports in module 2:
Matrix(rw)->show maclock stations fe.2.*
Port Number
------------
fe.2.3
fe.2.3
fe.2.6
fe.2.6
fe.2.9
fe.2.12
fe.2.14
Table 24‐2 provides an explanation of the command output.
Table 24-2 show maclock stations Output Details
Output...
Port Number
MAC address
24-4 Security Configuration
(Optional) Displays MAC locking information about end stations first
connected to MAC locked ports.
(Optional) Displays only MAC locking information about static
(management defined) end stations connected to MAC locked ports.
(Optional) Displays end station information for specified port(s). For a
detailed description of possible port_string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
MAC Address
-----------------
00-10-a4-e5-08-4e
08-00-20-7c-e0-db
00-60-08-14-4b-15
08-00-20-20-32-4b
08-00-20-77-aa-80
00-03-ba-08-4c-f0
00-01-f4-2c-ad-b4
What it displays...
Port designation. For a detailed description of possible port_string
values, refer to
MAC address of the end station(s) locked to the port.
Status State
-------------- --------------
active first learned
active first learned
active first learned
active first learned
active first learned
active first learned
active first learned
"Port String Syntax Used in the
show maclock stations
CLI" on page 4-2.