Show Ip Ospf - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring OSPF
Example
This example shows how to disable strict LSA checking on this router:
Matrix->Router(config)#router ospf 1
Matrix->Router(config-router)#graceful-restart strict-lsa-checking-disable

show ip ospf

Use this command to display OSPF information.
Syntax
show ip ospf
Parameters
None.
Defaults
None.
Mode
Router command, Any router mode.
Example
This example shows how to display OSPF information:
Matrix>Router#show ip ospf
Routing Process "ospf 20 " with ID 134.141.7.2
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Summary Link update interval is 0 seconds.
External Link update interval is 0 seconds.
Redistributing External Routes from,
Number of areas in this router is 3
Area BACKBONE (0)
Number of interfaces in this area is 0
Area has no authentication
SPF algorithm executed 65 times
Area ranges are
Link State Update Interval is 00:30:00 and due in 00:03:12.
Link State Age Interval is 00:00:00 and due in 00:00:00.
Area 0.0.0.3
Number of interfaces in this area is 1
Area has no authentication
SPF algorithm executed 59 times
Area ranges are
21-42 Routing Protocol Configuration
show ip ospf