Set Rmon Channel - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring RMON
Example
This example shows how to display RMON channel information for fe.2.12:
Matrix(rw)->show rmon channel fe.2.12
Port fe.2.12
----------------------------------------------------------
Control
OnEventIndex
EventIndex
Matches
Description
Owner

set rmon channel

Use this command to configure an RMON channel entry.
Syntax
set rmon channel index port-string [accept {matched | failed}] [control {on | off}]
[onevent onevent] [offevent offevent] [event event] [estatus {ready | fired |
always}] [description description] [owner owner]
Parameters
index
port‐string
accept matched |
failed
control on | off
onevent onevent
offevent offevent
event event
estatus ready | fired |
always
description description (Optional) Specifies a description for this channel.
owner
11-36 Network Monitoring Configuration
Channel index= 628
off AcceptType
0 OffEventIndex
0 Status
4498
Thu Dec 16 12:57:32 EST 2004
NetSight smith
Specifies an index number for this entry. An entry will automatically be
created if an unused index number is chosen. Maximum number of
entries is 2. Maximum value is 65535.
Specifies the port on which traffic will be monitored.
(Optional) Specifies the action of the filters on this channel as:
• matched ‐ Packets will be accepted on filter matches
• failed ‐ Packets will be accepted if they fail a match
(Optional) Enables or disables control of the flow of data through the
channel.
(Optional) Specifies the index of the RMON event that will turn this
channel on.
(Optional) Specifies the index of the RMON event that will turn this
channel off.
(Optional) Specifies the event to be triggered when the channel is on
and a packet is accepted
(Optional) Specifies the status of the event as:
• ready ‐ A single event may be generated.
• fired ‐ No additional events may be generated.
• always ‐ An event will be generated for every match.
(Optional) Specifies the name of the entity that configured this entry.
EntryStatus= valid
matched
0
ready
set rmon channel