Enterasys Matrix DFE-Gold Series Configuration Manual page 36

Structure of This Guide
Protocol, the Cisco Discovery Protocol, and the IEEE 802.1AB Link Layer Discovery Protocol
(LLDP) and LLDP Media Endpoint Discovery Protcol (LLDP‐MED).
Chapter
how to enable or disable switch ports and configure switch port settings, including port speed,
duplex mode, auto‐negotiation, flow control, port mirroring, link aggegation and broadcast
suppression.
Chapter
rights, target addresses, and notification parameters.
Chapter
parameters for the device, including bridge priority, hello time, maximum aging time and forward
delay; and how to review and set Spanning Tree port parameters, including port priority and path
costs. Also describes how to configure the Loop Protect feature.
Chapter
operation for each port, establish VLAN forwarding (egress) lists, route frames according to
VLAN ID, display the current ports and port types associated with a VLAN and protocol, create a
secure management VLAN, and configure ports on the device as GVRP‐aware ports.
Chapter
roles or profiles based on business‐specific use of network services; how to permit or deny access
to specific services by creating and assigning classification rules which map user profiles to frame
filtering policies; how to classify frames to a VLAN or Class of Service (CoS); and how to assign or
unassign ports to policy profiles so that only ports activated for a profile will be allowed to
transmit frames accordingly.
Chapter
Protocol (IGMP) settings for multicast filtering, including IGMP query count, IGMP report delay
and IGMP group status.
Chapter
Syslog.
Chapter
settings, how to monitor network events and status while the device is in switch mode, including
the eventlog, command history, netstats and RMON statistics.
Chapter
network addresses and routes.
Chapter
Chapter
aliases.
Chapter
and related parameters.
Chapter
to configure IP interface settings, how to review and configure the routing ARP table, how to
review and configure routing broadcasts, how to configure PIM, how to configure LSNAT and
DHCP server, and how to configure IP routes.
Chapter
Independent Multicast.
Chapter
display statistics for Network Address Translation.
Chapter
Sharing Network Address Translation.
xxxiv About This Guide
4, Port Configuration, describes how to review and configure console port settings, and
5, SNMP Configuration, describes how to configure SNMP users and user groups, access
6 Spanning Tree Configuration, describes how to review and set Spanning Tree bridge
7, 802.1Q VLAN Configuration, describes how to create static VLANs, select the mode of
8, Policy Classification Configuration, describes how to create, change or remove user
9, IGMP Configuration, describes how to configure Internet Group Management
10, System Logging Configuration, describes how to configure and display statistics for
11, Network Monitoring Configuration, describes how to manage general switch
12, Network Address and Route Management Configuration, describes how to manage
13, SNTP Configuration, describes how to configure and display statistics for SNTP.
14, Node Alias Configuration, describes how to configure and display statistics for node
15, NetFlow Configuration, describes how to configure NetFlow cache, port template
16, IP Configuration, describes how to enable IP routing for router mode operation, how
17, PIM Configuration, describes how to configure and display statistics for Protocol
18, Network Address Translation (NAT) Configuration, describes how to configure and
19, LSNAT Configuration, describes how to configure and display statistics for Load