Setting Console Port Properties
For information about...
show console bits
set console bits
clear console bits
show console stopbits
set console stopbits
clear console stopbits
show console parity
set console parity
clear console parity
show console
Use this command to display properties set for one or more console ports.
Syntax
show console [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, properties for all console ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display properties for console port com.1.1:
Matrix(rw)->show console com.1.1
Port
------------
com.1.1
clear console
Use this command to clear the properties set for one or more console ports.
Syntax
clear console [port-string]
4-4 Port Configuration
(Optional) Displays properties for specific console port(s)
Baud
Flow
Bits
------
------
----
38400
ctsrts
8
StopBits
Parity
----------
------
one
none
show console
Refer to page...
4-8
4-8
4-9
4-9
4-10
4-10
4-11
4-11
4-12
Autobaud
--------
disable