Key Chain - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring RIP
Parameters
1
2
1 2
none
Defaults
None.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
The "no" form of this command restores the default version of the RIP module update packets
that are accepted on the interface.
Example
This example shows how to set the RIP receive version to 2 for update packets received on VLAN
1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip rip receive version 2

key chain

Creates or deletes a key chain used globally for RIP authentication.
Syntax
key chain name
no key chain name
Parameters
name
Defaults
None.
Mode
Router command, Global configuration: Matrix>Router(config)#
Usage
The "no" form of this command deletes the specified key chain.
21-8 Routing Protocol Configuration
Specifies RIP version 1.
Specifies RIP version 2.
Specifies RIP versions 1 and 2.
Specifies that no RIP routes will be processed on this interface.
Specifies a name for the key chain.
key chain