Show Ip Slb Vservers - Enterasys Matrix DFE-Gold Series Configuration Manual

show ip slb vservers

Mode
Router command, SLB Real Server Configuration mode: Matrix>Router(config‐slb‐real)#
Usage
The "no" form of this command resets the weight load number to the default value of 1.
Example
This example shows how to set the weight load number to 100 on the real server at IP 10.1.2.3 in
the "httpserver" server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#faildetect ping-int 10 ping-retries 6
Matrix>Router(config-slb-real)#maxconns 20
Matrix>Router(config-slb-real)#weight 100
Matrix>Router(config-slb-real)#inservice
show ip slb vservers
Use this command to display server load balancing virtual server information.
Syntax
show ip slb vservers [detail | virtserver-name [detail]]
Parameters
detail
virtserver‐name
Defaults
If virtserver‐name is not entered, information about all configured virtual servers will be displayed.
If detail is not specified, summary information will be displayed.
Mode
Router command, Any router mode.
Examples
This example shows how to display summary information about all LSNAT virtual servers:
Matrix Router(config)#>show ip slb vservers
virt-serv
------------------------------------------------------------------------------
telnet
wftpd
(Optional) Displays detailed output for a specific virtual server or for all
configured virtual servers.
(Optional) Specifies a virtual server name for which to display
information.
vserv
vserv-ip-addr port
192.169.10.1 23
192.169.10.3 21
Configuring Load Sharing Network Address Translation (LSNAT)
persistence
server-farm type
matrix STICKY 200
ftpserver SSL
Enterasys Matrix DFE-Gold Series Configuration Guide 19-19
service
level ins name
IS
240 IS