Enterasys Matrix DFE-Gold Series Configuration Manual page 162

Cisco Discovery Protocol
cos‐ext
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Examples
This example shows how to clear all the Cisco DP parameters back to the default settings:
Matrix>clear ciscodp
This example shows how to clear the Cisco DP port status on port fe.1.5:
Matrix>clear ciscodp port status fe.1.5
3-14 Discovery Protocols Configuration
Clears the CoS priority for untrusted traffic of the port to 0.
Specifies the port(s) on which status will be set. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
clear ciscodp